Streamline
Synopsis
Constructs streamlines based on node vector data
Input Port
in_field
|
Mesh + Node_Data
|
ui_parent
|
user interface parent object
|
Parameters
Probe on/offf
|
UItoggle
|
displays a probe
|
start point
|
UIradioBoxLabel
|
selects the type of the probe
|
x-dimension
|
UIslider
|
sets the sampling probe frequency in the x direction
|
y-dimension
|
UIslider
|
sets the sampling probe frequency in the y direction
|
Transfomration Editor
|
UItoggle
|
displays the transformation editor for the probe
|
velocity vector
|
UIradioBoxLabel
|
selects a component of node data
|
Direction
|
UIradioBoxLabel
|
forward/backward motion
|
nsegments
|
UIslider
|
accuracy of integration
|
max segments
|
UIslider
|
total number of integration steps
|
order
|
UIslider
|
order of integration
|
min velocity
|
UIslider
|
minimum velocity value when integration stops
|
Color
|
UItoggle
|
sets the color of the streamlines
|
Ribbons
|
UItoggle
|
create streamribbons
|
ribbon width
|
UIslider
|
control width of ribbon
|
ribbon angle
|
UIslider
|
set ribbon angle
|
Output Port
out_stream_obj
|
output renderable object correponding to the streamline
|
out_probe_obj
|
output renderable object correponding to the probe
|
Description
Streamline constructs streamlines by integrating the vector data at the node. A ribbon display is possible.
The arrangement of the starting points of streamlines can be of three types: point, line and plane. Their positions can be changed using the Transform editor.
Input
in_field
The input is a field with 3 elements for each vector data.
ui_parent
A port to connect to a user interface object that contains the macro's widgets. By default, it is connected to the default user interface object in the application in which the macro is instanced. (This default connection is not drawn.)
Parameters
Probe on/off
UItoggle. If this parameter is turned on, the probe (the starting points of streamlines) is displayed.
start point
UIradioBoxLabel. Selects the probe type which can be either one of point, line or plane.
x-dimension
UIslider. This parameter is only valid when the probe type is either line or plane. X-dimension sets the sampling frequency of probes (number of starting points) in the x direction. However, in the case of line, this becomes the number of points in the line.
y-dimension
UIslider. This parameter is only valid when the probe type is plane. Y-dimension sets the sampling frequency of probes (number of starting points) in the y direction.
Transformation Editor
UItoggle. When this parameter is turned on, the tranformation editor for the probe is displayed. It is possible to rotate, translate and scale the probe using this editor. In addition, the probe can be transformed using the mouse after selecting the probe object i.e. without using this editor.
velocity vector
UIradioBoxLabel. Radio buttons to pick on which component to base the streamlines. The selection must be a three-element vector.
Direction
UIradioBoxLabel. Radio buttons to pick the direction of streamline generation, forward or backward. The default is forward.
nsegments
UIslider. An integer slider that sets how many integration steps will be used within one grid "cell" to compute the streamline path. The default is 2. The range is from 0 to 16.
max segments
UIslider. An integer slider that sets the total number of integration steps. When an individual streamline exceeds this value, integration for it stops. The range is from 1 to 10000. The default is 256.
order
UIslider. An integer slider that sets the order of integration. Higher orders are more accurate, but execute more slowly. The default is 2. The range is from 1 to 4.
min velocity
UIslider. A float slider. When a streamline falls below this velocity, the integration process for that streamline stops. The default is 0.00001. The range is from 0.0 to unbounded. You can use this to prevent wasted computation for streamlines barely moving, or even stationary (min_velocity = 0).
Color
UItoggle. When this parameter is turned on, the streamlines are colored based on the magnitude of the vector data. When this parameter is off, the lines are drawn in white.
Ribbons
UItoggle. When on, streamlines produce streamribbons rather than streamlines. The default is off.
ribbon width
UIslider. An integer slider. Scales the width of the ribbon. Ribbon width varies along its length according to the divergence of the flow. This value controls ribbon width at the beginning of the ribbon. The default is 1. The range is unbounded.
ribbon angle
UIslider. An integer slider. Controls the initial angle at which the ribbon is drawn. The default is 0. The range is 0.0 to 360.0.
Output Port
out_stream_obj
A renderable object corresponding to the stremline.
out_probe_obj
A renderable object corresponding to the probe.
Example
Not available
File
v/modules.v
See also related modules
