IPlinremap
Synopsis
linearly remap an ip_Image
Input Ports
|
&in_image |
ip_Image |
|
&in_roi |
ip_Roi |
Parameters
|
Constant |
UIslider |
constant to add |
|
Multiplier |
UIslider |
multiplier |
Output Ports
|
dst |
ip_Image_Out |
|
TmpField |
IPfld |
|
obj |
output renderable object |
Description
IPlinremap linearly remaps images by first adding a Constant to the input ip_Image pixels, followed by multiplying by Multiplier, and finally clamping (in the case of byte and short images).
Input Ports
-
&in_image
-
The input is a reference to an ip_Image. The ip_Images can be of any data type.
-
&in_roi
-
The input is a reference to an optional ip_Roi. The data must be of type byte.
Parameters
-
Constant
-
UIslider. Float slider to set the constant value. The default is 0.0. The range is -255 to 255.
-
Multiplier
-
UIslider. Float slider to set the multiplier. The default is 1.0. The range is -255 to 255.
Output Ports
-
dst
-
The output is a new ip_Image of the same dimensions, type, and number of bands as the input ip_Image. Its data values represent the linearly remapped input ip_Image.
-
TmpField
-
This output is the ip_Image converted back into an AVS/Express field.
-
obj
-
This is a renderable version of the output.
Example
Libraries.Examples.Image_Processing.IPlinremap
File
v/ip.v
See also
Not applicable.
